NO.1 A Cisco Unified Cm user is set up with one remote destination profile that has two remote
destination numbers: the
first destination number is the user's mobile phone in country A and the second is a mobile phone
located in country.
All outbound calls are centralized from the gateway at country A.
The user reports that inbound calls are properly routed to the mobile phone as long as the user is in
But inbound calls are not successfully routed to country B.
Which two options could be the cause of this? (Choose two)
A. The value of remote destination limits should be chaned to 2 instead of the default value of 4
under the end user page.
B. The enable mobile voice access option must be selected under the end user page.
C. The enable mobile connect option must be selected under the user's second remote destination
D. The rerouting calling search space assigned to the user's remote destination profile must have
access to international calls.
E. The value of maximum wait time for desk pickup should be changed to 20000 instead of the
default of D, 10000, under the end user page.
400-051 参考書 400-051 初心者
NO.2 Which entity signs a Cisco IP phone LSC?
A. Cisco Certificate Authority
B. Godaddy.com Enrollment Server
C. Registration Authority
D. Manufacturer Certificate Authority
E. Certificate Authority Proxy Function
By default, LSC certificates are not installed on Cisco IP phones. Cisco IP phones that are required to
certificates must be provisioned to allow TLS transactions before deployment in the field. LSC
certificates can be
provisioned to the Cisco IP phones through the Certificate Authority Proxy Function (CAPF) process.
This process is
completed using TLS and USB tokens coupled with the CTL client. Moreover, the Cisco ASA Phone
Proxy feature can
serve LSC certificates to the Cisco IP phones. Cisco IP phones will only work with the Cisco ASA Phone
Proxy and will
not establish secure connectivity with the Cisco Unified Communications Manager.
NO.3 Refer to the exhibit.
The common device configuration has been assigned to an IPv4 only phone. Which statement
happens when the phone attempts to register with Cisco unified Communications manager?
A. The IP phone invokes MTP to translate from ipv4 to IPv6
B. The IP phone uses SLAAC to acquire an IPv6 address and override the limitation
C. The IP phone ignores the settings and registers with the ipv4 address
D. The IP phone displays the message 'registration rejected' because it cannot support IPv6
Configuring Passthrough SIP Messages at the Global Level
Perform this task to configure passthrough SIP messages d at the global level:
2. configure terminal
3. voice service voip
5. mid-call signaling passthru media-change
5. Refer to the exhibit.
A customer has two Cisco Unified Communication manager 9.X clusters that serve the same location.
An engineer has
attempted to set up Enhanced Location call admission control so that any call within a site between
phones on the
two clusters do not decrement the available bandwidth to and from that site. However, the real time
currently shows bandwidth being used from the site to Hub_none. When a call is placed between
phones at the site,
which action must be taken to correct this situation?
A. The Hub_none location must have a link configured to the shadow location.
B. The hub_none location must have a link configuration to the phantom location.
C. The SIP trunks should be changed to use the shadow location.
D. The link between clusters must be a type of inter-cluster trunk instead of a sip trunk.
E. The device pool names must match between clusters.
Shadow is a new system location created for intercluster Enhanced Location CAC. In order to pass
information across clusters, the SIP ICT needs to be assigned to the system location Shadow.
The system location Shadow:
Is a valid location only for a SIP ICT. Devices other than SIP trunks assigned incorrectly to the Shadow
treated as if assigned to the Hub_None location.
Cannot have a link connecting to other user defined locations, so bandwidth cannot be deducted
Shadow location and other user defined locations.
Has no intra-location bandwidth capacities, so bandwidth cannot be deducted within the Shadow
6. Which two statements about the Cisco UC on UCS specs-based virtualization support model are
true? (Choose two.)
A. It has a configuration-based approach.
B. It has a rule-based approach.
C. It has less hardware flexibility compared to the third-party server specs-based support model.
D. It has less hardware flexibility compared to the UC on UCS TRC support model.
E. VMware vCenter is optional with this support model.
我々の目標は400-051 入門知識を準備するあなたにヘルプを提供してあなたに試験に合格させることです。この目標を達成するために、我々JapanCertは時間とともに迅速に発展しています。今まで精確的な問題集を開発しています。我々の400-051 入門知識を利用しているあなたは一発で試験に合格できると信じています。心配なく我々の資料を利用してください。
JapanCertは最新の70-697問題集と高品質のCFR-210問題と回答を提供します。JapanCertの9A0-409 VCEテストエンジンと70-347試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の70-743 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。